To Next PageTo Next PageWhat does E4 error mean on my BIG ASS FANS COOL-SPACE 300?
The E4 error indicates over voltage protection, meaning the supply voltage is too high (greater than 130 V). You can try a different circuit or install a voltage regulator.
What does E3 error mean on my BIG ASS FANS COOL-SPACE 300 Fan?
The E3 error indicates under voltage protection. This means the supply voltage is too low (less than 100 V). Try using a different circuit or installing a voltage regulator.
What does E1 error mean on my BIG ASS FANS Fan?
The E1 error indicates a voltage self-inspection error. Try using a different circuit or replacing the panel.
What does E6 error mean on my BIG ASS FANS COOL-SPACE 300?
The E6 error indicates overheat protection. Ensure that airflow is not obstructed, check for mineral buildup on the motor, and verify the extension cord size.
What does E5 error mean on my BIG ASS FANS COOL-SPACE 300 Fan?
The E5 error indicates overload protection, meaning the motor is running too hot. Check that airflow is not obstructed and verify the extension cord size.
What does E2 error mean on my BIG ASS FANS COOL-SPACE 300 Fan?
The E2 error indicates overcurrent protection. This means the current draw is too high. You should check the extension cord size, ensure the motor spins freely, and verify that airflow is not obstructed.
What to do if my BIG ASS FANS Fan is not running and makes a humming sound?
If your fan won't run but is humming, the blade might be hitting the shroud, or the motor might be stalled. Try re-centering the blade hub. If the motor will not turn by hand, you may need to replace it.
Why is my BIG ASS FANS COOL-SPACE 300 motor overheating and shutting off?
If the motor overheats, shuts off, and restarts, it could be due to an extension cord with too small a gauge or obstructed inlet air. Try replacing the extension cord with a heavier one and ensure there is at least 3 ft (0.9 m) of clearance for inlet air. If the problem continues, consider replacing the motor.
General| Brand | BIG ASS FANS |
|---|---|
| Model | COOL-SPACE 300 |
| Category | Fan |
| Language | English |
Connect the cooler to a water source using a standard garden hose.
Connect the cooler to a fused or breaker-protected circuit.
Key factors for optimal cooler placement including air supply and ventilation.
Step-by-step guide to filling, pump activation, and fan operation.
Explanation of indicators, buttons, and functions on the control panel.
Detailed explanation of each button on the remote control for operation.
Procedures for cleaning cooling media and the water sump for optimal performance.
Guidance on using water treatment tablets to prevent mineral buildup.
Common issues and solutions for the pump motor and operation.
Issues and solutions related to water flow, leaks, and spray bar performance.
Common problems and solutions for the fan motor, blade, and electrical connections.
Explanation of error codes and their corresponding solutions for the Cool-Space 500.
Contact details, address, and phone number for customer support.
Information on obtaining replacement parts and accessories.
