What to do if BigDog C-142 engine will not start?
If your BigDog Lawn Mower engine won't start, make sure you have fuel in the tank and that the fuel line isn't plugged. If there is incorrect fuel in the fuel system, drain the tank and replace it with the proper type. Replace the fuel filter if it's dirty. Also, ensure the choke is on.
What to do if BigDog C-142 starting motor does not crank?
If the starting motor on your BigDog Lawn Mower doesn't crank, ensure the steering control levers are in the park brake position and the switch is properly adjusted. Also, disengage the deck clutch switch. Check the battery and recharge or replace it if it's weak or dead. Inspect the electrical connections for corrosion or looseness, and replace the 15 amp fuse if it's blown.
Why is my BigDog C-142 Lawn Mower losing power?
Your BigDog Lawn Mower may be losing power due to several reasons. Check the air cleaner for restrictions and service it if needed. The tow valve may be open, so ensure it is closed. Also, inspect the traction drive belt for wear, looseness, or breakage, and replace it if necessary. If these steps don't resolve the issue, it could be poor compression.
Why does my BigDog C-142 Lawn Mower vibrate abnormally?
Abnormal vibration in your BigDog Lawn Mower can stem from several issues. Start by checking and tightening the engine mounting bolts. Then, inspect the engine pulley, idler pulley, and blade pulley for looseness and tighten them as needed. Inspect cutting blades and replace them if they are bent or unbalanced. Ensure blade mounting bolts are tightened. Check spindle bearing, replace or tighten it.
What to do if my BigDog C-142 is overheating?
If your BigDog Lawn Mower is overheating, start by checking the air intake screen and cleaning fins for clogs. Clean them to ensure proper airflow.
Why BigDog C-142 cutting height is uneven?
Uneven cutting height on your BigDog Lawn Mower could be due to several factors. Make sure the blades are sharp, and replace them if they are bent. Ensure the deck is level. Adjust the height of the anti-scalp wheel. Clean the underside of the deck. Adjust air pressure to 8 - 12 psi.
What to do if BigDog C-142 blades do not rotate?
If the blades on your BigDog Lawn Mower aren't rotating, first check the deck drive belt. If the deck drive belt is worn, loose, or broken, install a new one. If the belt is off the pulley, reinstall it and check for any underlying issues.
Why does my BigDog C-142 circle or veer?
If your BigDog Lawn Mower circles or veers in one direction, the steering linkage may need adjustment, or it might be loose, so tighten the linkage. Also, ensure the tires are properly inflated to 8 - 12 psi.
Why is my BigDog C-142 Lawn Mower jerky when starting?
If your BigDog Lawn Mower is jerky when starting, the steering control linkage may need adjustment, or it might be loose. Tighten the linkage.
Why is my BigDog C-142 creeping in neutral?
If your BigDog Lawn Mower creeps when the steering control levers are in neutral, the steering linkage likely needs adjustment. Adjust the linkage to resolve this issue.
General| Brand | BigDog |
|---|---|
| Model | C-142 |
| Category | Lawn Mower |
| Language | English |
Introduction to the manual's purpose and content for new owners.
Guidance on how to effectively navigate and understand the manual's sections.
Instructions on locating machine identifiers for service and parts ordering.
Details on obtaining authorized parts and accessing service support.
Outlines what components and issues are covered by the manufacturer's warranty.
Specifies who performs service and the owner's responsibilities for warranty claims.
Details what specific conditions or damages are not covered by the warranty.
Legal disclaimers regarding warranties and limitations on damages.
Explains the meaning and importance of various safety symbols and warnings.
Essential safety rules and guidelines for operating the mower.
Critical safety instructions for mowing on inclines and preventing tip-overs.
Specific precautions to protect children from hazards around the mower.
Overview of the operator interface and identification of primary controls.
Explains how safety switches prevent accidental engine starting.
Step-by-step guide for safely starting the mower's engine.
Instructions on maneuvering, steering, and controlling the mower's movement.
How to operate and adjust the cutting deck's height and anti-scalp wheels.
Safety rules to follow during maintenance, repairs, and adjustments.
Covers torque values, tire pressure, lubrication, and fluid levels.
Guidance on blade sharpening, removal, installation, and checks.
Intervals for routine service tasks to ensure optimal performance.
Solutions for typical operational problems and their probable causes.
Steps for properly preparing and storing the mower for the off-season.
Information on how to access additional product manuals and resources.
To Next Page
