BigDog stout mp User Manual (English)

Questions and Answers:

G
gail89Aug 18, 2025
What to do if my BigDog Lawn Mower engine will not start?
- Q
  qpattersonAug 18, 2025
  If your BigDog Lawn Mower engine won't start, starts hard, or fails to keep running, there could be several reasons. Make sure you have fuel or that the fuel line isn't plugged. If it is, fill the tank or replace the line. Also, check if the fuel valve is turned off and open it. Ensure that you are using the correct fuel type and replace the fuel filter if it's dirty. Finally, make sure the choke is on.
A
Alexis AndersonAug 20, 2025
What to do if starting motor does not crank on BigDog Lawn Mower?
- E
  eclarkAug 20, 2025
  If the starting motor on your BigDog Lawn Mower doesn't crank, make sure the steering control levers are in the park brake position and the switch is properly adjusted. Also, ensure the deck clutch switch is disengaged. Check the battery and recharge or replace it if it's weak or dead. Inspect the electrical connections for corrosion or looseness, and replace the 15 amp fuse if it's blown.
K
Kristina HallAug 22, 2025
Why is my BigDog Lawn Mower losing power?
- D
  Donna GilmoreAug 23, 2025
  If your BigDog Lawn Mower is experiencing a loss of power or won't operate in either direction, check the air cleaner for restrictions and service it if needed. Ensure the tow valve is closed. Inspect the traction drive belt and replace it if it's worn, loose, or broken. Finally, check the filter and fittings for air in the system and fix if needed.
L
Lynn AllenAug 26, 2025
How to fix abnormal vibration in BigDog Lawn Mower?
- P
  Pamela SmithAug 26, 2025
  To address abnormal vibration in your BigDog Lawn Mower, start by tightening the engine mounting bolts. Next, check the engine pulley, idler pulley, and blade pulley, tightening any that are loose. If the cutting blades are bent or unbalanced, replace them. Also, tighten any loose blade mounting bolts. Finally, replace or tighten the spindle bearing if it is worn or loose.
E
emilyandersonAug 28, 2025
Why does my BigDog Lawn Mower have an uneven cutting height?
- O
  oscar18Aug 28, 2025
  If your BigDog Lawn Mower is producing an uneven cutting height, start by sharpening the blades. If a cutting blade is bent, replace it. Ensure the tires are properly inflated, adjusting the air pressure to 8 - 12 psi (55 - 83 KPa). Adjust the height of the anti-scalp wheel if it is not set correctly. Clean the underside of the deck if it's dirty.
L
Lisa GlassAug 30, 2025
What to do if BigDog Lawn Mower circles or veers?
- J
  John WadeAug 30, 2025
  If your BigDog Lawn Mower circles or veers in one direction, adjust the steering linkage. If the steering linkage is loose, tighten it. Also, adjust the air pressure to 8 - 12 psi (55 - 83 KPa) if the tires are improperly inflated.
S
strongantonioSep 2, 2025
What to do if blades do not rotate on BigDog Lawn Mower?
- J
  Joel OchoaSep 2, 2025
  If the blades on your BigDog Lawn Mower do not rotate, install a new deck drive belt if the current one is worn, loose, or broken. If the deck drive belt is off the pulley, reinstall it and check for the reason why it came off.
L
laurenbriggsSep 4, 2025
Why is my BigDog Lawn Mower jerky?
- C
  Carlos StanleySep 4, 2025
  If your BigDog Lawn Mower is jerky when starting or only operates in one direction, adjust the steering control linkage and tighten any loose steering linkage.
J
jenniferschultzSep 7, 2025
What to do if BigDog Lawn Mower creeps when parking brake is engaged?
- C
  cdavisSep 7, 2025
  If your BigDog Lawn Mower creeps when the parking brake is engaged, adjust the steering linkage and the parking brakes.
S
Sarah BarnesSep 9, 2025
Why is my BigDog Lawn Mower air cooled engine overheating?
- M
  michaelhernandezSep 9, 2025
  If your BigDog Lawn Mower's air-cooled engine is overheating, clean the air intake screen and cooling fins.

BigDog stout mp Specifications

General

Brand	BigDog
Model	stout mp
Category	Lawn Mower
Language	English

Summary

General Information

BigDog® Mower Service Program

Overview of the BigDog® Mower Service Program, detailing manuals for servicing and maintaining Stout MP mowers.

Maintenance Introduction

Discusses the importance of regular maintenance for preventing downtime and premature failure, and outlines inspection practices.

Warranty

Explains warranty repair requirements, emphasizing authorized dealers and the invalidation of claims for unauthorized work.

Safety

Safe Servicing Practices

General safety guidelines for operating and servicing the mower, warning about amputating hazards and throwing objects.

Understand Correct Service

Emphasizes understanding service procedures, avoiding unauthorized modifications, and using two people for checks with the engine running.

Pre-Operation Precautions

Covers safe fuel handling, emphasizing flammability and explosive vapors, and following general refueling and storage guidelines.

Operation Precautions

Safety advice for operating the mower, including fire prevention, safe engine starting, and general operation rules.

General Maintenance Precautions

Guidelines for performing maintenance safely, including engine running procedures, safe working under the machine, and general care.

Prevent Battery Explosions

Safety measures to prevent battery explosions, including handling, charging, ventilation, and correct cable connection/disconnection.

Avoid Acid Burns

Precautions for handling battery acid, including personal protection, first aid for spills, and ingestion, to prevent burns and blindness.

Torque

Standard Torques

Lists standard torque values for various fastener sizes (e.g., #10, M3) in ft-lbs and N-m for assembly.

Special Torques

Provides specific torque values for critical components like wheel nuts, blade bolts, and clutch bolts.

Power Unit Maintenance

Steering Adjustments

Details procedures for adjusting steering control levers for neutral positioning and proper alignment.

Park Brake Spring Adjustment

Instructions for checking and adjusting the park brake spring compression for correct operation.

Belts

Guidance on inspecting belts for wear, signs of damage, and proper pulley groove condition, and replacement recommendations.

Hydraulic Pump Belt Adjustment

Explains that hydraulic pump belt tension is set by an idler and spring, with no specific adjustment procedure detailed.

Hydraulic system

Information on the mower's hydrostatic transmissions, fluid type, level checks, and initial/periodic oil and filter changes.

Tires

Specifies recommended tire air pressures for level mowing and notes warranty implications for non-pneumatic tires.

Engine Maintenance

General Engine Maintenance

Refers to the Engine Owner's Manual for detailed break-in and regular maintenance, including oil levels and torques.

Engine Oil and Filter

Procedures for checking and changing engine oil and filter, including safety precautions for hot engines and spillage.

Engine Air Filter

Guidance on inspecting and replacing the engine air filter element, emphasizing proper sealing and avoiding over-servicing.

Fuel Evaporation System Filter

Information on the fuel evaporation system filter, its replacement interval, and model applicability.

Fuel & Evaporative System Line Routings

Diagrams and explanations of fuel and vapor line connections for domestic and export mower models.

Engine RPM Settings

Details the factory-set engine RPM for mowing efficiency and provides guidelines for checking and adjusting idle speeds.

Deck Adjustments

Deck Leveling

Step-by-step instructions for leveling the mower deck, including tire pressure checks and block placement.

Blades

Maintenance guidelines for mower blades, including checking for damage, sharpening, balancing, and proper installation.

Deck belt adjustment

Instructions on adjusting the spindle belt tension using the idler spring and chain anchor points for proper operation.

Electrical

Electrical Schematic - Kawasaki

Provides a wiring diagram for the mower's electrical system, illustrating component connections and wire routing.

Related product manuals