Need help?Do you have a question about the Bigtide HL1916V and is the answer not in the manual?
Medical Equipment With respect to electric shock, Fire and mechanical hazards only in accordance with IEC 60601-1 and CAN/CSA C22.2 No. 601.1
Ventilation slots are located on the rear of the housing. Ensure proper airflow for optimal performance.
The permissible ambient temperature range must not be violated. Monitor operation outside this range can cause damage.
Do not change settings on site as it may void the guarantee. Contact servicing department for any changes.
Connect the power and signal cables to the display unit following safety guidelines.
Switch on the flat panel display using the power switch. The operation LED will light up.
Follow EMC guidelines and use screened cables. Avoid routing signal and power cables together.
The connection panel for signals and power is located at the rear of the display, under the stand.
Connect VGA cable with 15-pin Sub-D connector for analog input and DVI socket for digital signal.
Describes settings for operation with video sources. Key settings include graphics memory and fine adjustment.
Achieve optimum quality with 1280x1024 resolution. Adjust picture position, size, and sharpness carefully.
On-Screen Display menu for adjusting various picture and system settings. Includes key assignments and functions.
Lists safety standards, approvals (CAN/CSA, cTUVus), protection class, degree of protection, and conformity (CE).
States compliance with electromagnetic compatibility standards: IEC6061-1-2 and FCC Class B.
To Next Page
General