19" LCD MONITOR
REV A
2
2. Declarations
Safety precautions
Regular maintenance and calibration are recommended
Please note that liquid crystal displays such as the HL1916T do not have a
failure rate of zero and image parameters may change over time (e.g.
luminance or discoloration). Please ensure that all measures are taken to
prevent injuries or incorrect diagnoses. Regular maintenance and calibration
are recommended.
Correct and safe operation of the flat panel displays is dependent on proper
transport, storage, installation and assembly, as well as careful operation and
maintenance. The units must only be used for applications for which monitors
are normally used. The information in the Section "Technical data" must be
observed exactly.
For the sake of safety, the following precautions must be observed:
Medical Equipment
With respect to electric shock,
Fire and mechanical hazards
only in accordance with
IEC 60601-1 and CAN/CSA
C22.2 No. 601.1
To Next Page
Loading...