•
You can set a 10 second countdown preparation on each program( count up, countdown,
interval) (Key READY)
•
You can automatically repeat a Countdown or Count up program (Key REPEAT)
•
You can mute the buzzer and the clock will silently flash when it reaches its pre-set time in
any mode. (Key CANCEL)
•
While any program is running you can press shift key and you can see the clock time for 3
seconds without stopping the operating program
•
Direct entry via the keypad of any time desired (You don't have to move digits one at a time,
just enter the number desired)
•
If power is cutoff operating functions continue until power is restored
•
9 results stopwatch storage where you can save and view 9 race results in stopwatch mode
•
There are two loudness options for the internal buzzer using a switch on the sideof the clock
•
The switch on the side is NOT a power switch just for beeper loudness option
•
You can store programs for quick recall at the press of a button
•
Countdown Storage F1-F2, Count up Storage F4-F5, Interval Storage F7-F8
•
F3 storage button is a 9 position multi use storage where you can store numbers for any
function, countdown, count up, or interval. Press F3, the clock will show F3:--:F1, F1 will
flash, and press “UP” . Each number from 1 to 9 is a storage position. Press OK when you
have finished storing to exit F3.
To Next Page
Loading...