10. STOPWATCH RACE RESULT STORAGE
Press SW Press OK, then press “0” 1-9times you can save 1-9 different person's result. ( the
stopwatch is recording the value the moment you press the 0 button but will not stop the
stopwatch.) Press “OK” to Pause/Stop. When paused you can press number 1,2,3...9 to see
the 1-9 different person's record. After viewing the records press “0” to clear all records.
11. RACE CLOCK COUNT UP TIMER
This program allows you to set the start time and the end time in count up mode
•
Press F6 to enter Race Clock Timer function and the clock displays 00:00:00.
•
Set the start time first and press Set/Save. The clock will beep and then displays
00:00:00.Set the ending time and press Set/Save.
•
Press the “OK” key to start the Race Clock Timer
PRESS INT KEY TO ACCESS FUNCTION
The Interval Timer uses 3 sequential programs. H1 is the working time for your exercise, H2 is
the resting time and H3 is the number of times you want to repeat the exercise.
•
Press the INT key to enter the interval timer setting function and the clock displays H1
00:00:00
•
Press “Set/Save” key for the first time and the clock displays H1 XX XX and the XX blinks.
Change the time required by pressing the number keys to change blinking digits and press
left arrow or right arrow key to move between minutes and seconds. This is the working time.
•
Press “Set” key a second time and the clock displays H2 XX XX and the XX blinks. Change
the time MM:SS and this is the rest time.
To Next Page
Loading...