Quick Start Guide
8
Step 3: Screw the cap back tightly.
NOTE: Please power off the device before
inserting or removing the SIM card.
Step 4: Login to your BiPAC 4700ZU(L)
The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the
attached PC to this router is in the same subnet and has an IP address in the range between
192.168.1.1 ~ 192.168.1.253.
Open a web browser and type http://192.168.1.254 in the URL address bar.
The login prompt will appear. Input the default username (admin) and password (admin) for
Account type, Administrator.
<*This username / password may vary by different Internet Service
Providers.>
Please see the relevant sections of user manual for detailed instructions on how to
configure your BiPAC 4700ZU(L).
Step 5: Use the Quick Start wizard for fast Internet connection setups.
4.1 Change administration password: Setup a new password for “admin” account for device
management. The default password is “admin”. Click Continue to go on to the next step.
*The password may vary by different Internet Service Providers.
4.2 Time Zone Configuration: Enable and select your Time Zone then click Continue to go on
to the next step
type
assign a new,
unique password
Confirm Password: re-
new password again
Next Step: click Next
select your time zone
Next Step: click Next
To Next Page
Loading...
Need help?
General
