48
Select WAN Port
Connect Mode: User can choose either “ADSL” or “3G” mode.
Protocol: The current ATM protocol in the device.
VPI / VCI: The current value of VPI/VCI in the device.
Username: To show current authentication username.
IP Address: To show current value of IP address in the device.
TEL No.: The dial string to make a GPRS / 3G user internetworking call.
Username: The username provided by your service provider.
APN: An APN is similar to a URL on the WWW, it is what the unit makes a
GPRS / UMTS call.
Set Wireless configuration
To Next Page
