HOW TO RIDE THE MOTORCYCLE 137
NOTE
æ The downshifting function of KQS
system works only when the throttle
is closed.
æ The downshifting function of KQS
system does not work when the
engine speed is high (near the red
zone on the tachometer).
KQS Setting
ÿ KQS mode can be selected from
on or o in the menu mode. Refer
to the Menu Mode section in the
GENERAL INFORMATION chapter.
Bimota Cornering
Management Function (KCMF)
Using feedback from IMU (Inertial
Measurement Unit) that gives an even
clearer real-time picture of chassis
orientation, KCMF monitors engine
and chassis parameters throughout the
corner - from entry, through the apex,
to corner exit - modulating brake force
and engine power to facilitate smooth
transition from acceleration to braking
and back again, and to assist riders in
tracing their intended line through the
corner.
This function oversees following
control systems: KTRC, KIBS.
: Entry of Corner (KTRC)
: Apex of Corner (KIBS)
: Exit of Corner (KTRC)
To Next Page
Loading...
