98 GENERAL INFORMATION
Hazard Button
Push in the hazard button with the
ignition switch in the position. All turn
signal lights and turn signal indicators
will blink.
NOTE
æ Be careful not to use the hazard
lights for an extended period of time,
otherwise the battery may become
totally discharged.
RESET Button
The RESET button is used for setting
the meter.
Meter setting: Refer to the Multifunction
Display Resetting section.
Cruise Control Buttons
The cruise control buttons are used for
setting the cruise control.
Cruise control Refer to the Electronic
setting:
Cruise Control System section in the HOW
TO RIDE THE MOTORCYCLE chapter.
Brake Lever Adjuster
NOTICE
Only adjust the front brake lever
position as shown below. Do
not attempt to make any other
adjustments to the front brake lever
and master cylinder.
If any brake adjustment is required
other than the brake lever position,
consult your authorized dealer.
While pushing the brake lever
forward, rotate the adjuster and
choose a suitable lever position.
To Next Page
Loading...
