EasyManua.ls Logo

bimota KB4 - Engine Oil

bimota KB4
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
148 MAINTENANCE AND ADJUSTMENT
Engine Oil
Oil Level Inspection
ÿ If the engine is cold, start the engine
and run it for several minutes at idle
speed.
ÿ Stop the engine, then wait several
minutes until the oil settles.
NOTICE
Racing the engine before the oil
reaches every part can cause engine
seizure.
ÿ Check the engine oil level through
the oil level inspection window. With
the motorcycle held level, the oil
level should come up between the
upper and lower level lines next to
the oil level inspection window.
A
A
A
B
A
C
A
D
A. Oil Level Inspection Window
B. Oil Filler Cap
C. Upper Level Line
D. Lower Level Line
ÿ If the oil level is too high, remove
the excess oil through the oil ller
opening using a syringe or some
other suitable device.
ÿ If the oil level is too low, add oil to
reach the correct level. Use the
same type and brand of oil that is
already in the engine.

Table of Contents

Related product manuals