96 GENERAL INFORMATION
Dimmer/Passing Button
High or low beam can be selected
with the dimmer/passing button like
a trigger.
To use the high beam, push the
button out. To turn o the high beam,
pull the button.
To use the high beam for the passing,
pull the button. The high beam turns on
only while the button is pulled.
A. Push: Dimmer Function (Turning on high beam)
B. Pull: Passing Function/Dimmer Function
(Turning o high beam)
High beam... (High beam indicator:
see Meter Instruments section)
Low beam...
Passing ...
NOTE
æ Do not allow anything to cover the
headlight lens when the headlight
To Next Page
Loading...
