Binatone CAPRICE 500 - Setting up your phone; Set Language and LCD Contrast; Set Time and Date

7
4. Setting up your phone
The following section details how to set up your telephone.
Press the MENU
button to enter the
 SET LANGUAGE
 LCD CONTRAST
Note: The system will time out if you leave more than 15 seconds between key presses.
!
With the phone in standby mode:
1 Press MENU button.
Ö The display shows
OPTIONS MENUOPTIONS MENU
OPTIONS MENUOPTIONS MENU
OPTIONS MENU .
2 Press UP button to go to the language setting.
Ö The display will show
SET LANGUAGESET LANGUAGE
SET LANGUAGESET LANGUAGE
SET LANGUAGE .
3 Press MENU button to confirm.
4 Press UP or DOWN button to select one of the
11 languages: ENGLISH, FRENCH, SPANISH,
GERMAN, ITALY, PORTUGUESE, TURKISH,
DANISH, POLISH, SWEDISH, and DUTCH.
5 Press MENU button to confirm.
6 Continue with programming, or press RECALL
button to return to standby mode.
SET
LANGUAGE
The date and time on your phone can be
synchronized with the local date and time if
you have subscribed to the Caller Display
service from your telephone company.
However, you can set the date and time manually:
1 Press MENU button.
Ö The display shows
OPTIONS MENUOPTIONS MENU
OPTIONS MENUOPTIONS MENU
OPTIONS MENU .
SET TIME/
DATE
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
Options menu and then
cycle through the following options:
use the UP or DOWN
buttons to
Note: The alkaline batteries must be fitted in the base before setting up your
phone. When the batteries become discharged, they should be replaced with
 SET TIME/DATE
 SET FLASH TIME
 EXIT OPTION
new ones as soon as possible to prevent all memories being lost and settings
returning to their factory default.
RECALL/ESC
MENU
MENU
MENU
MENU