4.3 End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
4.4 Adjust Volume
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.
4.6 Turn off the Handset Ringer
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
icon is displayed on the LCD.
4.7 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD
4.8 Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name in
the phonebook to go with the number, the name will be displayed instead.
4.8.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
“
EMPTY
”
.
Note: The display will still flash the Call icon and show CALL or the Caller
To turn the ringer back on, press and hold <HASH/#> again.
Note: You can still use <TALK ON>
To turn the keypad lock off, press and hold <STAR/*> again.
icon is displayed on the LCD.
The most recent last number will display at the top of the redial list.
of this entry.
LOCK”
the handset is ringing.
to answer a call when
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the
earpiece and speakerphone volumes.
Display number, when there is an incoming call, even if the ringer is
turned off.
12
To Next Page
Loading...
