Note: The respective melody will be played while browsing the ringtone list.
5. Press <OK> to confirm.
7.3.2 Set the Ringer Melody for External Calls
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING SETUP.
3. Press <OK> and <UP/DOWN> to select EXT RING.
4. Press <OK> and <UP/DOWN> to select melody you want to hear for
Note: The respective melody will be played while browsing the ringtone list.
5. Press <OK> to confirm.
7.3.3 Set the Ringer Volume
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING SETUP.
3. Press <OK> and <UP/DOWN> to select RING VOLUME.
4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total
ume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.
5. Press <OK> to confirm.
7.3.4 Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
Key Tone - a single beep is emitted when you press a key.
you need to charge the handset batteries.
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select TONE SETUP.
3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /
4. Press <OK> and <UP/DOWN> to turn on or off these tones.
5. Press <OK> to confirm.
Out of Range Tone - emitted while you are talking on the phone to alert you to
move
Low Battery Tone - emitted while you are talking on the phone to alert you that
OUT OF RANGE.
7.3.5 Set the Handset Language
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select LANGUAGE.
3. Press <OK> and <UP/DOWN> to select the desired language.
4. Press <OK> to confirm.
closer to the base unit, before the call is lost.
external calls.
of 6 ringer vol
21
To Next Page
Loading...
