Binatone iDECT C5i System - Reset

26
2
.
Press UP u or DOWN d to select Advanced Set .
3
m
Press MENU/OK m to confirm.
4
.
Press UP u or DOWN d to select Change PIN .
5
m
Press MENU/OK m to confirm.
Î The display shows Enter New PIN _ _ _ _ .
6
@
Use the keypad to enter your new 4-digit PIN code.
7
m
Press MENU/OK m to confirm.
Î The display shows Confirm PIN _ _ _ _ .
8
m
Press MENU/OK m to confirm your setting.
Î The display shows New PIN Stored .
Note: Keep a safe record of your new PIN. You will need to enter this PIN between
steps 4 and 5 before you can change your PIN code again.
Reset
You can reset your phone to the original default settings.
Note: All your Phonebook entries, Redial list, Call list and recorded
messages/memos in the answering machine will be deleted after a reset.
Follow the steps below to restore your phone to its default factory settings.
1
m
Press MENU/OK m to enter the main menu.
2
.
Press UP u or DOWN d to select Advanced Set .
3
m
Press MENU/OK m to confirm.
4
.
Press UP u or DOWN d to select Reset .
5
m
Press MENU/OK m to confirm.
Î The display shows Enter PIN _ _ _ _ .
6
@
Use the keypad to enter the 4-digit PIN code (default PIN code is 0000).
7
m
Press MENU/OK m to confirm.
Î The display shows Confirm Reset? .
8
m
B
Press MENU/OK m to confirm the reset or press HANG-UP B
to cancel.
iDect_C5i_IFU_EN_UK.book Page 26 Monday, November 30, 2009 11:54 AM