30
Set the answer mode and outgoing messages (OGM)
There are two answering modes - Answer & Record mode or Answer
Only mode.
The Answer & Record mode is switched on by default so that callers
can leave messages when their calls are answered by the answering
machine.
You can change the answer mode and / or record your own personal
outgoing messages.
If Answer Only mode is set, calls are answered and a message played
automatically to the caller, but the caller cannot leave a message.
Your callers are greeted with an OGM when the call is answered by
the answering machine.
You can use either the pre-defined OGM or record a personalised
OGM for this greeting.
1
m
Press MENU/OK m to enter the main menu.
2
.
Press UP u or DOWN d to select
Answ. Machine
.
3
m
Press MENU/OK m to confirm.
4
.
Press UP u or DOWN d to select
Answ. Mode
.
5
m
Press MENU/OK m to confirm.
6
.
Press UP u or DOWN d to select
Answ. & Rec.
or
Answer Only
.
7
m
Press MENU/OK m to confirm.
** Now you have to choose either the pre-defined or personalised
outgoing message for the selected answer mode.
EITHER select a pre-defined OGM
There are two pre-defined OGMs - one for the Answer & Record
mode and the other for the Answer Only mode.
8
.
Press UP u or DOWN d to select
Predefined
.
9
m
Press MENU/OK m to confirm.
Î The pre-defined message is played, followed by a confirmation beep.
iDect_C5i_IFU_EN_UK.book Page 30 Monday, November 30, 2009 11:54 AM
To Next Page
Loading...
