EasyManua.ls Logo

Binatone WR3000N - Appendix C: Specifications

Binatone WR3000N
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WR3000N 300M Wireless N Router
- 104 -
Appendix C: Specifications
General
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g and IEEE
802.11n
Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
Ports
One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M
Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100 STP (maximum 100m)
Cabling Type
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 STP (maximum 100m)
LEDs PWR, SYS, WLAN, WAN, LAN (1-4), WPS
Safety & Emissions FCC, CE
Wireless
Frequency Band* 2.4~2.4835GHz
Radio Data Rate
11nup to 300MbpsAutomatic
11g54/48/36/24/18/12/9/6MbpsAutomatic
11b11/5.5/2/1MbpsAutomatic
Frequency Expansion DSSS(Direct Sequence Spread Spectrum)
Modulation DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
Security WEP/WPA/WPA2/WPA2-PSK/WPA-PSK
Sensitivity @PER
270M: -68.5dBm@10% PER;
130M: -72dBm@10% PER
54M: -74.5dBm@10% PER
11M: -89.5dBm@8% PER;
6M: -89.5dBm@10% PER
1M: -93.5dBm@8% PER
Antenna Gain 5dBi
Environmental and Physical
Operating : 0~40 (32 ~104℉℉)
Temperature.
Storage: -40~70(-40~158)
Operating: 10% - 90% RH, Non-condensing
Humidity
Storage: 5% - 90% RH, Non-condensing
*Only 2.412GHz~2.462GHz is allowed to be used in USA, which means only channel 1~11 is available
for American users to choose.

Related product manuals