1 — GUN BODY .................................................... 1
2 SPA-71-K5 BAFFLE PLATE (KIT OF 5) ................................ 1
FLAT TIP COMPONENTS
3 54-5799-K
✙
FLUID SEAT (4400PSI) ...................................... 1
(TUNGSTEN CARBIDE) ..................................
4 SPA-98-K5 GASKET (KIT OF 5) .......................................... 1
5 114-XXXXX
■
FLAT TIP (FINE FINISH TIPS 9-XXXX-F) ............ 1
6 54-5878-K
▼
FLAT TIP HVLP AIRCAP .................................... 1
(FLAT TIP LVMP AIRCAP 54-5797-K)
(AA-10 FLAT TIP HVLP AIRCAP 54-5890-K)
(FLAT TIP AIRCAP HVLP 54-5795)
7 54-5852 RETAINING RING .............................................. 1
8 54-5794
m
FLAT TIP GUARD .............................................. 1
TWIST TIP COMPONENTS
3A 54-5832-K
✙
TWIST TIP FLUID SEAT (4400PSI) ..................... 1
(TUNGSTEN CARBIDE)
5A 9-XXX-75
■
TWIST TIP ......................................................... 1
5B 54-7539-K2 TWIST TIP BRACE (KIT OF 2) ........................... 1
6A 54-5924-K
▼
TWIST TIP HVLP AIRCAP ................................. 1
(TWIST TIP LVMP AIRCAP 54-5925-K)
7 54-5928 RETAINING RING .............................................. 1
8A 54-5921
m
TWIST TIP GUARD ........................................... 1
8B 54-5930
m
TWIST TIP GUARD SCREW............................... 1
ITEM PART
NO. NO. DESCRIPTION QTY.
9 SN-402-K AIR VALVE ASSEMBLY ..................................... 1
10 —
▲
TRIGGER ........................................................... 1
11 54-5780 FLUID TUBE ASSEMBLY .................................. 1
15 SN-9-K3 AIR INLET FITTING 1/4” NPS (KIT OF 3) .......... 1
16 —
●
FILTER BRACKET SCREW ................................. 1
17 —
●
FILTER BRACKET .............................................. 1
18 54-5826 FLUID NEEDLE ASSEMBLY KIT (4400PSI) ........ 1
19 54-5850 BLANKING NEEDLE NUT ................................. 1
22 54-5815 SPREADER VALVE ASSEMBLY.......................... 1
23 — # BODY BUSHING ............................................... 1
24 — # BODY BUSHING GASKET ................................. 1
25 —
▲
TRIGGER NUT ................................................... 1
26 —
▲
TRIGGER SCREW .............................................. 1
29 54-1835 100 MESH DISC FILTER (1 PIECE)..................... 1
(60 MESH FILTER 54-1836)
30 —
*
DISC FILTER HOUSING ..................................... 1
31 —
*
DISC FILTER RETAINING NUT........................... 1
ITEM PART
NO. NO. DESCRIPTION QTY.
PARTS LIST
When ordering, please specify Part No. (Not all Part Nos. are available for purchasing.)
Refer to page 10 when referencing Item Nos.
▼ All aircap kits are pre-assembled with Retaining ring and
appropriate tip guard. When switching from flat tip to
twist tip, or vice versa, be sure to order correct fluid seat
(3/3A). For twist tip, item 5B will also be needed.
■ Refer to page 12 for available tip sizes. When purchasing
twist tip, discard packaged brace/seal and use Item 5B only.
✙ Pre-assembled with gasket SPA-98.
▲ Available as part of kit 54-5835.
● Available as part of kit 54-5827.
# Available as part of kit 54-5829.
m Mandatory for operating pressures above 69 bar [1000 psi].
* Available as part of kit 54-4726-K. Order filter (29)
separately.
AA4400M AIR-ASSIST AIRLESS SPRAY GUN
ACCESSORIES
FITTINGS
54-4976-K3 3-Pack 1/4" NPT(f) x 3/8" O.D. Push-In Tube Fitting
(optional)
72-2332 Fluid Inlet Swivel (1/4"m x 1/4"f)
FLUID FILTER
54-1835 100 Mesh (Disc) Filter
54-1836 60 Mesh (Disc) Filter
HVLP AIRCAP TEST KITS
54-5882-K Flat Tip HVLP Aircap Test Kit (Incl Gauge)
for 54-5878 air cap
54-5836-K Flat Tip HVLP Aircap Test Kit (Incl Gauge)
for 54-5795 air cap
54-5837-K Twist Tip HVLP Aircap Test Kit (Incl Gauge)
TEST GAUGES
54-5327 HVLP Test Gauge
EN
77-2922-R11 (5/2018)12 / 16www.carlisleft.com
To Next Page
Loading...
