Binks TROPHY SERIES - Conventional Air Cap and Fluid Nozzle Selection; LVMP Air Cap and Fluid Nozzle Selection; HVLP Air Cap and Fluid Nozzle Selection

77-3049-R2.1 (12/2014)
11 / 20
EN
BINKS “TROPHY” SERIES AUTOMATIC SPRAY GUN
AIR CAP AND FLUID NOZZLE SELECTION CHARTS
CHART 10: CONVENTIONAL AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap
Part No.
Spray
Pattern
Range
CFM
@
30 PSI
CFM
@
50 PSI
CFM
@
70 PSI
Fluid Nozzle Typical Coatings
11-C 46-6500 8 – 12" 9.8 14.2 18.7
45-11050 series,
1.0 mm – 1.8 mm
Stains, Primers, Lacquers, Enamels,
Acrylics, Reduced Latex
12-C 46-6501 4 – 12" 8.3 12.1 14.2
45-11050 series,
1.0 mm – 1.8 mm
Lacquers, Enamels,
Top Coats,
Low Viscosity Adhesives
14-C 46-6503 8 – 14" 17.0 24.4 31.2
45-11060 series,
2.0 mm – 2.6 mm
or
45-11080 Tungsten Carbide
Series (VT),
1.4 mm – 2.6 mm
Zinc Rich, Adhesives, Glazes, Engobes,
Ceramics, Porcelain Enamels
CHART 11: LVMP – LOW VOLUME MEDIUM PRESSURE
AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap Part
No.
Spray
Pattern
Range
CFM @30 PSI Gun
Inlet (Dynamic)
Fluid Nozzle Typical Coatings
22-L 46-6510 4 – 12" 11.2
45-11050 series,
0.5 mm – 1.6 mm
Stains, Primers, Lacquers, Enamels,
Acrylics, Reduced Latex
23-L 46-6511 4 – 12" 10.6
45-11050 series,
1.0 mm – 1.8 mm
Lacquers, Enamels, Top Coats,
Low Viscosity Adhesives
24-L 46-6512 2 – 6” 14.3
45-11050 series,
0.5 mm – 1.8 mm
Small Pattern Applications of
Stains, Enamels, Lacquers, Acrylics
25-L 46-6513 4 – 15” 14.7
45-11050 series,
0.85 mm – 1.8 mm
Dyes, Stains, Toners, Enamels, Lacquers,
Primers, Urethanes, Solvent Coatings,
Waterborne Coatings
CHART 12: HVLP – HIGH VOLUME LOW PRESSURE
AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap
Part No.
Spray Pattern
Range
SCFM @
10 PSI Cap
Pressure
(Dynamic)
Gun Inlet
PSI @
10 PSI at
Air Cap
(Dynamic)
Fluid Nozzle Typical Coatings
31-H 46-6517 8 – 12" 10.5 17
45-11050 series,
.85 mm – 1.8 mm
Stains, Low Viscous Enamels
32-H 46-6518 8 – 18" 15.5 24
45-11050 series,
.85 mm – 1.8 mm
Lacquers, Enamels, Multi-Colors,
Multi-Spec, Nonstick Coatings,
Cut-Latex
33-H 46-6519 8 – 12" 11.0 16
45-11050 series,
.85 mm – 1.6 mm
Stains, Lacquers, Enamel,
Multi-Color,
Multi-Spec, Nonstick Coatings
39-H 46-6525 4 – 12" 8.7 14
45-11050 series,
.85 mm – 1.6 mm
Dyes, Stains, Toners, Enamels,
Lacquers, Primers, Urethanes,
Solvent Coatings, Waterborne
Coatings