3 / 20
EN
Binks reserves the right to modify equipment specification without prior notice.
EC Declaration of Conformity
Manuf. By: Finishing Brands
195 Internationale Blvd.
Glendale Heights, IL 60139
Type/Series: Automatic Spray Guns
Model: Binks “Trophy” Series
The equipment to which this document relates is in conformance with the following standards or other normative
references:
BS EN IS0 12100:2010 and BS EN 1953:1998 + A1:2009 and thereby conform to the protection requirements
of Council Directive 2006/42/EC relating to Machinery Safety Directive, and;
BS EN 13463-1:2009, Council Directive 94/9/EC relating to Equipment and Protective Systems for use in
Potentially Explosive Atmospheres, protection level II 2 G X.
Approved By: Marvin Burns Date: April 2, 2014
Binks
Binks Trophy Series Automatic Spray Gun is the
premier spray gun for use in automatic spray
applications, incorporating some of the best
features of our Trophy hand spray gun.
Trophy Automatic gun offers total control of
atomizing air pressure, side port air, fluid flow,
and spray patterns in high and low production
settings. Latest advancements in atomization
technology have been incorporated for achieving
consistent, fine finishes when spraying a wide
range of industrial coatings.
Binks Trophy Automatic Series Spray Guns can be
used with pressure pots and pumps.
Binks Trophy Series Spray Guns are offered in
three different atomization technologies: HVLP,
LVMP and Conventional.
SPECIFICATIONS
Maximum Air Pressure 140 psi / 9.6 bar (P-1)
Maximum Fluid Pressure 140 psi / 9.6 bar (P-2)
Gun Body Anodized Aluminum
Cylinder Air Pressure to
Operate the Gun
65 psi / 4.5 bar
Fluid Path Stainless Steel
Fluid Inlet Size 3/8" NPS / BSP(m)
Air Inlet Size 1/4" NPS / BSP(m)
Gun Weight 20.8 oz. / 590 grams
Wetted Parts
Stainless Steel &
UHMWPE
Gun Mounting Hole 1/2” diameter
To Next Page
Loading...
