EasyManua.ls Logo

bintec elmeg RS123 - User Manual

bintec elmeg RS123
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RS123 Router
Installation Manual
Copyright© bintec Dm674-I Version 1.1 01/2018 bintec elmeg
bintec elmeg
Manual
RS123 Router 1

Table of Contents

Questions and Answers

  • K
    Kevin YoungAug 12, 2025
    What to do if I forgot the access password for my bintec elmeg RS123?
    • P
      Pamela NormanAug 12, 2025
      If you've forgotten your access password, you can reset the configuration using the RESET button as detailed in the relevant section.
  • K
    ktuckerAug 15, 2025
    Why is the USB LED never lighting up green on my bintec elmeg RS123?
    • L
      Lori WrightAug 15, 2025
      The USB LED might not light up green if the device inserted into the USB connector isn't supported by the router or if the appropriate license isn't available. Check that the device is supported by checking the bintec website for a list of supported 3G USB modems.
  • L
    Laurie SmithAug 19, 2025
    What to do if the LTE LED never lights up in green on my bintec elmeg Network Router?
    • G
      Glenn JohnsonAug 20, 2025
      If the LTE LED doesn't light up green, check the SIM card installation and configuration, especially the PIN number.
  • D
    David GillAug 23, 2025
    Why is the WLAN LED never lighting up green on my bintec elmeg RS123?
    • S
      scott23Aug 23, 2025
      If the WLAN LED never lights up green, you should check the router’s configuration as well as the configuration for the remote station(s).
  • X
    xgordonAug 27, 2025
    What to do if the SFP LED never lights up in green on my bintec elmeg RS123 Network Router?
    • A
      alanadamsAug 27, 2025
      If the SFP LED never lights up in green, verify the compatibility of the SFP plugged into the router and ensure the appropriate license is available for its use.
  • J
    Jeremy BrandtAug 31, 2025
    What to do if none of the LEDs lights up on my bintec elmeg RS123 Network Router?
    • B
      Breanna JonesAug 31, 2025
      If none of the LEDs light up, check the power supply to the router. This includes the power source, the ON/OFF switch, and the main power outlet.
  • J
    Jenny WarrenSep 3, 2025
    What to do if none of the Eth WAN LEDs lights up on my bintec elmeg Network Router?
    • C
      Cathy TorresSep 3, 2025
      If none of the Eth WAN LEDs light up, check the Ethernet cable and the connection to the network.
  • E
    emurraySep 7, 2025
    What to do if none of the LAN Switch Port LEDs lights up on my bintec elmeg RS123?
    • E
      Edward MasonSep 7, 2025
      If none of the LAN Switch Port LEDs light up, check the Ethernet cable and the connection to the network.

bintec elmeg RS123 Specifications

General IconGeneral
Product TypeRouter
Manufacturerbintec elmeg
ModelRS123
VPN SupportYes
VPNIPSec, PPTP, L2TP
FirewallYes
VLAN SupportYes
DHCP ServerYes
Operating Temperature0°C to 40°C
Device TypeRouter
LAN Ports4
ISDN ProtocolsDSS1
Max Wireless SpeedNot applicable
Power SupplyExternal power supply
Humidity10% to 95% (non-condensing)
WAN Ports1 x Gigabit Ethernet
Wireless StandardNot applicable

Related product manuals