Section 1
Introduction
1.1 Overview
The PowerPac HC power supply is designed to provide constant voltage, current or
power for electrophoresis applications. The power supply operates at the value
specified for the constant parameter, with limits for the other parameters. To prevent
damage to the electrophoresis cell, the PowerPac HC provides automatic
crossover to constant current, constant voltage, or constant power, depending on
which set limit is first reached. If the set limit of the non-constant parameter is
reached, the power supply will switch, making the limiting non-constant parameter
the new constant.
Output specifications:
Voltage: Adjustable from 5 to 250 volts (V), in 1 V increments
Current : Adjustable from 0.01 to 3.00 amperes (A), in 0.01 A increments
Power: Adjustable from 0.05 to 300 watts (W) in 1 W increments
Output jacks: Four sets of output jacks are provided to facilitate connection of
up to 4 identical electrophoresis cells simultaneously
Fig. 1. Front View.
Fig. 2. Rear View.
setup
stop/home
abc
12
def
3
jklghi
45
mno
6
tuvpqrs
7
EDIT
8
0CE
wxyz
9
OUTPUT JACKS
FRONT PANEL
1
To Next Page
Loading...
