Wash | 61
Wash DISPENSE (DISP) Defaults and Ranges, cont’d
Parameter Units Default Range Models
-30 to 30 ELx405, Magna
-45 to 45
with 96-well
plates
Select, Select CW,
HT/96-tube
Bottom Horizontal
Dispense Position
quarter
steps
0
-25 to 25
with 384-
well plates
Select, Select CW,
HT/96-tube
HT/192-tube
-20 to 20
with 96-well
plates
Select, Select CW,
HT/96-tube
Bottom Horizontal
Y Dispense Position
(Select, Select CW,
HT only)
quarter
steps
0
-10 to 20
with 384-
well plates
Select, Select CW,
HT/96-tube
HT/192-tube
Prime Before Start? No No/Yes
Prime Volume milliliters 40 1-999
Prime Flow Rate 7 1-9
All
Notes:
• The shaded options above are not available for Dispense-only programs.
• Bottom Horizontal Dispense Position and Bottom Horizontal Y Dispense
Position: For higher throughput of the HT with 384-well plates, use the 192-
tube manifold.
ELx405 Operator's Guide
To Next Page