Biostar AM1MD - Chapter 2: Hardware Installation; Install Central Processing Unit (AM1 Socket)

AM1MH / AM1MD / AM1ML
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 Install Central Processing Unit (AM1 Socket)
Step 1: Locate the CPU socket on the motherboard
Step 2: Pull the socket locking out from the socket and then raise the lever up to
a 90-degree angel.
Step 3: Look for the triangular cut edge on socket, and the golden dot on CPU
should point forwards this triangular cut edge. The CPU will fit only in the
correct orientation.