G41D-M7 BIOS Manual
9
SuperIO Conf iguration
BIOS SETUP UTILITY
Advanced
vxx.xx (C)Copyright 198 5-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
Allows BIOS to E nable
or Disable Flopp y
Controller
Configure ITE8712 Super IO Chipset
Onboard Floppy Con troller [Enabled]
Serial Port1 Addre ss [3F8/IRQ4]
Serial Port1 Mod e [Normal]
Serial Port2 Addre ss [2F8/IRQ3]
Serial Port2 Mod e [Normal]
Parallel Port Addr ess [378]
Parallel Port Mo de [Normal]
Parallel Port IR Q [IRQ7]
Keyboard PowerOn [Disabled]
Mouse PowerOn [Disabled]
Restore on AC Powe r Loss [Power Off]
Onboard Floppy Controller
Select enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you installed another FDC or the system uses
no floppy drive, select disabled in this field.
Options: Enabled (Default) / Disabled
Serial Port1 Address
Select an address and corresponding interrupt for the first and second serial ports.
Options: 3F8/IRQ4 (Default) / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Serial Port1 Mode
This item allows you to determine how the serial port1 should function.
Options: Normal (Default)
Serial Port2 Address
Select an address and corresponding interrupt for the first and second serial ports.
Options: 2F8/IRQ3 (Default) / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Serial Port2 Mode
This item allows you to determine how the serial port2 should function.
Options: Normal (Default)
To Next Page
Loading...
Need help?
General
