Biostar G41D3 - SET UP User Manual

Name: Biostar G41D3 - SET UP
Brand: Biostar
Rating: 4 (1 reviews)

47 pages

To Next Page

To Previous Page

Motherboard Manual

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will

fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the CPU_FAN1. This completes the installation.

Questions and Answers:

Need help?

Do you have a question about the Biostar G41D3 - SET UP and is the answer not in the manual?

General