Biostar H610MH - User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Summary

Chapter 1: Introduction

1.3 Specifications

Detailed technical specifications of the motherboard and its components.

1.4 Rear Panel Connectors

1.5 Motherboard Layout

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for installing the CPU onto the motherboard socket.

2.2 Install a Heatsink

Instructions for mounting the CPU heatsink and fan assembly.

2.4 Install System Memory

Guide on how to install DDR4 memory modules into the DIMM slots.

2.5 Expansion Slots

2.7 Headers & Connectors

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

3.2 BIOS Update

Instructions for updating the motherboard's BIOS using provided utilities.

Chapter 4: Useful Help

4.1 Driver Installation

4.4 Troubleshooting

Provides solutions for common system problems and CPU overheating.

Biostar H610MH Specifications

General

Processor socket	LGA 1700
Processor manufacturer	Intel
Compatible processor series	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Maximum number of SMP processors	1
Memory channels	Dual-channel
Memory slots type	DIMM
Number of memory slots	2
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Supported memory clock speeds	1867, 2133, 2400, 2666, 2933, 3200 MHz
Supported memory module capacities	4GB, 8GB, 16GB, 32GB
Supported storage drive interfaces	M.2, SATA III
HDCP	Yes
DirectX version	12.0
Parallel processing technology support	-
BIOS type	UEFI
Number of SATA III connectors	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LAN controller	Intel® I219-V
Ethernet interface type	Gigabit Ethernet
Audio chip	Realtek ALC897
Component for	PC
Motherboard chipset	Intel H610
PC health monitoring	CPU, FAN, Temperature, Voltage
Audio output channels	7.1 channels
Motherboard form factor	micro ATX
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	236 mm
Width	208 mm