Biostar H61M U3 - Setup Prompt Timeout; Bootup Numlock State; Gatea20 Active; Boot Menu

TH61MU3/H61MU3/H61MH/H61ML
UEFI BIOS Manual
24
4 Boot Menu
This menu allows you to setup the system boot options.
BIOS SETUP UTILITY
Bootup NumLock State [On]
Full Logo Screen display [Enabled]
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
Boot Success Beep [Enabled]
UEFI Boot [Disabled]
Boot Option #1
Boot Option #2
CD/DVD ROM Drive BBS Priorities
Hard Drive BBS Priorities
Boot Configuration
Boot Option Priorities
Setup Prompt Timeout 1
CSM16 Module Version
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Number of seconds to wait for
setup activation key.
65535(0xFFFF)means indefinite
waiting.
Main Advanced Chipset Boot Security Performance Save & Exit
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Enter
+/-
F1
F3
F4
ESC
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options: 1 (Default)
Bootup NumLock State
This item selects the keyboard NumLock state.
Options: On (Default) / Off
Full Logo Screen Display
This item allows you to enable/disable Full Screen LOGO Show function.
Options: Enabled (Default) / Disabled
GateA20 Active
Upon Request – FA20 can be disabled using BIOS services. Always – do not allow
disabling GA20; this option is useful when any RT code is executed above 1MB
Options: Upon Request (Default) / Always