Motherboard Manual
38
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy
efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power
phases, current power saving, and total power saving. This tool integrates a friendly
GUI to monitor your CPU Usage, CPU Watt, and CPU Temperature. Moreover, it
optimizes power saving and best power efficiency on your system. (The illustration
below is for reference only)
Display manufacturer &
software version information
Display CPU
information
Reset Time &
Consumption
Auto Phase Mode
Maxi-Energy Mode
Typical Mode
Medium Mode
Performance
Mode
G.P.U Mode Setting:
This utility provides five modes, upon your requirements, to improve system
performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the system still can keep
excellent performance.
z Auto Phase Mode: System switches the mode automatically according to
current system loading condition.
z Performance Mode: This is the mode saving power consumption most. Least
energy will be used in the system.
z Typical Mode: Compared with that in Performance Mode, energy
consumption in this mode is a little bit more.
z Medium Mode: The standard system power saving mode.
z Maxi-Energy Mode: The best system performance mode.
To Next Page
Loading...
Need help?
General
