6. Tweaker Menu | 37
BIOS USER GUIDE
This item allows more than two frequency ranges to be supported.
Power Limit 1 Override
This item enables or disables Power Limit 1 Override. If this opon is disabled,BIOS will program
the default values for Power Limit 1 and Power Limit 1 Time Window.
»
»
The following items appear only when you set the Power Limit 1 Override funcon to [Enabled]
Power Limit 1
This item Power Limit 1 value in Milli Was. BIOS will round to the nearest 1/8W when
programming. 0 = no custom override. For 12.50W, enter 12500.
Power Limit 2 Override
This item enables or disables Power Limit 2 Override. If this opon is disabled, BIOS will program
the default values for Power Limit 2.
»
»
The following items appear only when you set the Power Limit 2 Override funcon to [Enabled]
Power Limit 2
This item Power Limit 2 value in Milli Was. BIOS will round to the nearest 1/8W when
programming. If the value is 0, BIOS will program this value as 1.25*TDP. For 12.50W, enter
12500. Processor applies control policies such that the package power does not exceed this
limit.
C states
This item enables or disables CPU Power Management. Allows CPU to go to C states when it’s
not 100% ulized.
Enhanced C-states
This item enables or disables C1E. When enabled, CPU will switch to minimum speed when all
cores enter C-State.
This item sets C-State Auto Demoon.
This item sets C-State Un-demoon.
To Next Page
Loading...
Need help?
General
