Biostar P4M900-M4 Setup Manual

Motherboard Manual
4
1.3 MOTHERBOARD FEATURES
Ver 5.x Ver 6.x
CPU
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Do not support Willamette CPU.)
Supports Hyper Threading technology
*It is recommended to use processors with
95W power consumption.
Socket 478
Intel Pent ium 4 / Celeron D processor up to
3.4 GHz (Do not support Willamette CPU.)
Supports Hyper Threading technology
*It is recommended to use processors with
95W power consumption.
FSB 400 / 533 / 800 MHz 400 / 533 / 800 MHz
Chipset
VIA P4M900
VIA VT8237A
VIA P4M900
VIA VT8237A
Graphic
Chrome9 HC 3D / 2D Graphics
Max Shared Video Memory is 256 MB
Chrome9 HC 3D / 2D Graphics
Max Shared Video Memory is 256 MB
Super I/O
ITE 8718F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control in itiat ives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
ITE 8718F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control in itiat ives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DIMM Slots x 2
Supports DDR2 533 / 667
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Cap icity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
DIMM Slots x 2
Supports DDR2 533 / 667
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Cap icity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
IDE
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
SATA
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 s pecification compliant.
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 s pecification compliant.

Biostar P4M900-M4 Specifications

General

Brand	Biostar
Model	P4M900-M4
Category	Motherboard
Language	English