Biostar Viotech 3200+ - Page 12

Viotech 3200+ BIOS Manual
11
EuP Control
When EuP is enabled, the system will meet EuP requirement.
Options: Disabled (Default) / Enabled
Suspend mode
The item allows you to s elec t the susp end type under the ACPI operating system.
Options: S3 (STR) (Default) Suspend to RAM
S1 (POS) Power on Suspend
Auto POS+STR
Repost Video on S3 Resume
The item allows you to determine whether to invoke VGA BIOS post on S3/STR
resume.
Options: No (Default) / Yes
ACPI Version Features
The item allows yo u to select the vers ion o f ACPI.
Options: ACPI v3.0 (Default) / ACPI v1.0 / ACPI v2.0
ACPI APIC support
This item is used to enable or disable the motherboard's APIC (Advanced
Programmable Interrupt Controller). The APIC provides multiprocessor support,
more IRQs and faster interrupt handling.
Options: Enabled (Default) / Disabled
Resume On Ring
This item allows you control the wake on ring function.
Options: Disabled (Default) / Enabled
Resume by PCI/PCI-E/LAN PME
This item allows you control the wake by PCI/PCI-E/LAN PME function.
Options: Disabled (Default) / Enabled