Need help?Do you have a question about the Biotek BioStack 4 and is the answer not in the manual?
General| Brand | Biotek |
|---|---|
| Model | BioStack 4 |
| Category | Laboratory Equipment |
| Language | English |
General introduction to the BioStack models and their capabilities.
Detailed description of the BioStack's functionality and benefits.
Specifics on how BioStack 4 handles microplates with lids.
List of items included in the BioStack package.
Information on available accessories for the BioStack.
Technical specifications for the BioStack instrument and microplates.
Information on necessary hardware/software upgrades for instrument interfacing.
Procedures for safely unpacking and inspecting the BioStack for damage.
Step-by-step guide to remove shipping hardware from BioStack models.
Required wrist angle settings for interfacing with different instruments.
How to configure the BioStack for 0° integration with liquid handlers.
How to configure BioStack options using dip switches.
Procedure to adjust the wrist angle dip switch setting.
How to change dip switch settings for using 50-plate stacks.
Instructions for safely connecting the BioStack to a power source.
Steps for connecting the BioStack to a computer for control.
Procedures for connecting the BioStack to a washer or dispenser.
Guidance on next steps and related sections in the manual.
Instructions for properly repacking the BioStack for shipping.
Preparatory steps before starting BioStack operations.
How to orient and load microplates into the input stack.
Instructions for using the pedestal for efficient plate loading.
Guidelines on microplate compatibility and dimensional requirements.
Steps and methods for processing microplates with the BioStack.
Methods for controlling the BioStack via keypad or computer.
Procedures for stopping or pausing the plate processing.
How to restore microplates to their original order after processing.
Specific procedures and considerations for processing plates with lids.
Explanation of how the BioStack 4 handles plate de-lidding.
Recommendations to minimize condensation on microplate lids.
How to create and use plate lid definition files for processing.
Key dimensions of microplates relevant to BioStack operation.
Steps for powering on and initiating the BioStack system test.
General introduction to BioStack maintenance activities.
Schedule outlining routine maintenance tasks and frequencies.
Safety warnings and precautions to follow during maintenance.
List of materials needed for routine cleaning and decontamination.
Step-by-step instructions for routine cleaning of the BioStack.
Procedures for decontaminating the BioStack, especially for biohazards.
List of tools and supplies needed for decontamination.
Steps to decontaminate the carrier surface and microplate stacks.
How to clean and lubricate the linear ways for smooth operation.
General overview of BioStack qualification activities (IQ/OQ).
Schedule for Installation Qualification (IQ) and Operational Qualification (OQ).
Verifying the correct assembly and configuration of the BioStack.
Confirming proper operation of BioStack software and gripper alignment.
Methods for correcting common plate transfer problems.
List and explanation of communication error codes.
Specific error codes generated by the BioStack instrument.
Errors related to incorrect plate lid definition file parameters.
Introduction to the barcode scanner's functionality and components.
Step-by-step instructions for installing the barcode scanner hardware.
Specific steps for installing the scanner on the right side.
Specific steps for installing the scanner on the left side.
How to change dip switch settings to enable the barcode scanner.
Instructions for installing the cable duct for the scanner.
Guidelines for preparing and attaching barcode labels to microplates.
Procedures for testing scanner functionality with readers.
Procedures for testing scanner functionality with Precision/XS.
To Next Page
