BioTel Heart MCOT Patch - Page 16

gobio.com/patients
16
Apply the Patch to Your Skin
4. Remove top white paper. Gently peel off the upper liner by starting with the
raised tab.
• After the liner is removed, press all the edges of the patch rmly and on the
sensor so the patch will adhere to your skin.
• Smooth out any wrinkles by pressing the patch.
• Wait 10-15 minutes to allow the patch to fully adhere to your skin before
proceeding to the next step.
Getting Started
LEFTRIGHT
Minor discomfort may occur when the patch is attached to the skin. If you have sensitive skin, this product may not be
appropriate for use.