11
CLEANING AND HYGIENE
Complete Cleaning
• It is advisable to clean the machine daily or if necessary more frequently, in case it
was very dirty or after long periods of inactivity.
• The cleaning must be carefully made for the parts in contact with the product.
• Clean the structure of the machine with soft cloths, sponges, and rinse with water
frequently. Finally dry with soft and dry cloths.
Attention: the machine is not protected against steam cleaners, high pressure power
washer, or similar systems. In this case there is risk of short circuit or serious damages to
the machine.
Disassembly of the Removable Accessories
• All the cleaning operations of the machine must always be done with the machine not
equipped with hopper, taking out the plug from the socket.
Disassembly of the Paddle
• Hold the handle, turn anti-clockwise and lift.
• To avoid accidents before disassembling, position
the paddle away from the hopper pins.
Disassembly of the Hopper
• Open the cover completely.
• Turn the hopper anti-clockwise,
lift it and take it away from the base.
Disassembly of the Conveyor Belt
• Lift the belt on the side of the return pulley.
• Take off and disassemble the conveyor belt.
To Next Page
Loading...