Need help?Do you have a question about the BIRO AFMG-24 and is the answer not in the manual?
General| Category | Food Processor |
|---|---|
| Model | AFMG-24 |
| Motor | 2 HP |
| Hopper Capacity | 50 lbs |
| Power | 2 HP |
| Capacity | 50 lbs (Hopper) |
| Speed Settings | Single Speed |
| Material | Stainless Steel |
| Voltage | 115 |
| Frequency | 60 Hz |
Instructions for removing equipment from packaging and preparing for initial setup.
Details on motor horsepower, kilowatt, voltage, frequency, phase, and amperage.
Steps for processing product, including first and second grind procedures.
Procedure for correctly installing the mixing paddle assembly.
Guidelines for lubricating motor, main bearings, and transmissions.
List of fasteners used for assembling the frame and case components.
Fasteners specific to the mixer assembly.
Fasteners specific to the grinder assembly.
Fasteners required for assembling the power transmission components.
List of components included in the footswitch assembly.
Instructions for adjusting the micro-switches for treadle operation.
To Next Page