1.4 Definitions of Symbols
This symbol identifies a safety note. Ensure you understand the
function of this control before using it. Control function is described in
the operation manual.
Type BF Equipment
IPX2, IPX7 Degree of Waterproof
This symbol indicates the manufacturer.
This symbol indicates the serial number of the device.
This symbol indicates the authorized representative in the European
Community of manufacturer.
This symbol indicates the temperature limitation for operation,
This symbol indicates the humidity limitation for operation, transport
and storage.
This symbol indicates the compliance with the essential requirements
and provisions of the Medical Device Directive 93/42/EEC as amended
by 2007/47/EEC.
When disposing of some
components, do not dispose as general
wastes.
Adhere to all applicable laws regarding recycling.
his symbol means an item is known to pose hazards in all MRI
environments.
※ According to IEC 60601-1-6 General requirements for basic safety and essential performance
– Collateral Standard: Usability, the definition and using these symbols is adjusted.
CAUTION
Federal law restricts this device to sale by or on the order of a physician.