BT-350 Operation Manual
10
0.4 General precautions on environment
Do not keep or operate the equipment under the environment listed below.
Avoid placing in an area
exposed to moisture. Do
not touch the equipment
with a wet hand.
Avoid exposure to direct
sunlight
Avoid placing in an area
where there is a high
variation of temperature.
Operating temperature
ranges from 10°C ~ 40°C.
Operating humidity ranges
from 5% ~ 85%.
Avoid in the vicinity of
electric heater
Avoid placing in an area
where there is an
excessive humidity rise or
ventilation problem.
Avoid placing in an area
where there is an excessive
shock or vibration.
Avoid placing in an area
where chemicals are
stored or where there is in
danger of gas leakage.
Avoid dust and especially
metal material enter into
the equipment.
Do not disjoint or
disassemble the device.
Bistos Co., Ltd. does not
take responsibility for it.
Power off when the
equipment is not fully
ready to operate.
Otherwise, the equipment
could be damaged.