BT-350 Operation Manual
3
0 Safety information
This manual is for trained healthcare professionals using the BT-350 fetal monitor. It describes
how to set up and use the monitor and transducers. Familiarize yourself with all instructions
including warnings and cautions before starting to monitor patients.
You should be:
Trained in the use of fetal heart rate(FHR) monitors
Trained in the interpretation of FHR traces.
Familiar with using medical devices and with standard fetal monitoring procedures.
In this manual, the following symbols are used for the purpose of:
WARNING
Alerts you to a potential serious outcome, adverse event or safety
hazard. Failure to observe a warning may result in death or serious
injury to the user or patient.
CAUTION
Alerts you to where special care is necessary for the safe and
effective use of the product. Failure to observe a caution may
result in minor or moderate personal injury or damage to the
product or other property, and possibly in a remote risk of more
Symbols Used
The following symbols identify all instructions that are important for safety. Failure to follow these
instructions can lead to injury or damage to the fetal monitor. When used in conjunction with the
following words, the symbols indicate:
The following symbols are placed on product, label, packaging and this manual in order to stand for
the information about:
Used to identify safety information.
Be well-known this information thoroughly before using BT-350.
During the operation, do not disconnect any cable.
Power ON/OFF button
Indicates the need for the user to consult the instructions for use
External Signal IN/OUT port
IPX8
IPX8 Protected against the effects of continuous immersion in water (1 meter
of water for over 40 minutes)
Refer to the operation manual. Read the manual before placing the device.
To Next Page
Loading...
Need help?
General
