P/N : 550-ENG-OPM-EUR-R01
the monitor fits within the border of the shelf, and avoid stacking monitors on
the shelf. Personal injury or equipment damage could occur.
Attach the infant warmer to the stand using the bolts provided. Failure to do so
could result in the infant warmer separating from the stand if sufficiently tilted.
Personal injury or equipment damage could occur.
This product has been validated with the accessories and options listed in this
manual and found to comply with all relevant safety and performance
requirements applicable to the device. It is therefore the responsibility of that
person or organization who makes an unauthorized modification, or
incorporates an unapproved attachment to the device.
An operator may only perform maintenance procedures specifically described
in this manual.
Do not remove the covers of a BT-
550 yourself to avoid damage to the
equipment and unexpected electrical shock. Only qualified Bistos service
engineer must repair or replace components.
C
heck the rating of power source compatible with the input voltage rating of
BT-550.
The UART port is for debugging purposes only. It does not allow connections
with other devices.
Take off the metallic
materials such as watch and ring and touch only the
insulated plastic part of BT-550
To Next Page
Loading...
Need help?
General
