• Select the device you want to manage.
• Tap Belongs to, then tap Family.
• Enable the Manage this device option to start monitoring the device.
• Use the corresponding switch to enable the Remote Management option.
• Activate Remote Management by following the Pending activation instructions.
Note that features differ depending on the Operating System the device uses.
To manage a device, it has to be included in the Family list and to run on one of the
supported operating systems. You can find the complete list in the section “Bitdefender
BOX Agent” (p. 18).
The manageable features are grouped in the same screen and can be accessed
individually.
By enabling the Manage device option, you can monitor BOX features for each device.
To see all available features for a specific device in the BOX network, select it from the
Family list.
4.2.1. Management of Windows devices
Local Protection
An extra layer of security through the Local Protection module is offered to Windows
devices. The module uses the On-access scanning and Active Threat Control Bitdefender
technologies to offer complete security solution for all the areas of your system and
can be enabled only if no active antivirus solution is detected.
To enable Local Protection:
• Tap the icon in the Bitdefender BOX app and tap Devices on Android, or tap the
icon on iOS.
• Select the Family device you want to manage.
• Tap Belongs to.
• Use the corresponding switch to enable the Local Protection option.
• Activate Local Protection by following the Pending activation instructions.
21BOX Management
To Next Page
Loading...