S19 Pro Hydro Server Installation Guide
Make sure that the S19 Pro Hydro server remains powered during the upgrade process. If power fails before the
upgrade is completed, you will need to return it to Bitmain for repair.
5. Administering Your Server
5.
Administering Your Server
5.1 Checking Your Firmware Version
To check your firmware version:
1.
Enter the backstage of your server, find the firmware version on the bottom.
2.
File System Version displays the date of the firmware your server use. In the example below, the server is using firmware
version 20210517.
5.2 Upgrading Your System
To upgrade the server’s firmware:
1.
In System, click Firmware Upgrade.
To Next Page
Loading...
