Name: BITMAIN ANTMINER S19 Pro
Brand: BITMAIN
Rating: 4 (1 reviews)

To Next Page

To Previous Page

- 12 -

S19 Pro Server Installation Guide

3.Configuring the Server

3. Configuring the Server

Setting Up the Pool

To configure the server:

1. click Setting marked below.

Note:

1. Fan speed percentage can be adjusted, but we recommend to keep the default setting. The server will

adjust the fan speed automatically if the fan speed percentage has yet been selected.

2. There are two working modes of S19 Pro server: Normal mode and Sleep mode. The server enters the sleep

mode under the condition that the control board is powered while hashboards are not powered.

2. Set the options according to the following table:

Option

Description

Mining address

Enter the address of your desired pool.

The S19 servers can be set up with three mining pools, with decreasing priority

from the first pool (pool 1) to the third pool (pool 3).

The pools with low priority will only be used if all higher priority pools are offline.

Name

Your worker ID on the selected pool.

Password (optional)

The password for your selected worker.

3. Click Save after the configuration.

Questions and Answers:

Need help?

Do you have a question about the BITMAIN ANTMINER S19 Pro and is the answer not in the manual?

BITMAIN ANTMINER S19 Pro Specifications

General