EasyManuals Logo

BITMAIN ANTMINER S19 Pro User Manual

Default Icon
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
- 16 -
S19 Pro Server Installation Guide
Environmental Requirements
Please run your server in accordance with the following requirements
1. Basic Environmental Requirements:
1.1. Climatic Conditions:
Description
Requirement
Operating Temperature
0-40
Operating Humidity
10-90%RH (non-condensing)
Storage Temperature
-20-70
Storage Humidity
5-95%RHnon-condensing
Altitude
<2000m
1.2. Site Requirements of the Server Running Room:
Please keep the server running room away from industrial pollution sources:
For heavy pollution sources such as smelters and coal mines, the distance should be more than 5km.
For moderate pollution sources such as chemical industries, rubber and electroplating industries, the distance should be more than
3.7km.
For light pollution sources such as food factories and leather processing factories, the distance should be more than 2km.
If unavoidable, the site should be chosen in the perennial upwind direction of the pollution source.
Please do not set your location within 3.7km from the seaside or the salt lake. If unavoidable, it should be built as airtight as
possible, equipped with air conditioning for cooling.
1.3. Electromagnetic Environmental Conditions:
Please keep your site away from transformers, high-voltage cables, transmission lines and high-current equipment, for example,
there should be no high-power AC transformers (>10KA) within 20 meters, and no high-voltage power lines within 50 meters.
Please keep your site away from high-power radio transmitters, for example, there should be no high-power radio transmitters
(>1500W) within 100 meters.
2. Other Environmental Requirements
The server running room shall be free of explosive, conductive,magnetically conductive and corrosive dust. The requirements of
mechanical active substances are shown below:
2.1 Requirements of Mechanical Active Substances
Mechanical Active Substance
Requirement
Sand
<= 30mg/m
3
Dust (suspended)
<= 0.2mg/m
3
Dust (deposited)
<=1.5mg/m
2
h

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BITMAIN ANTMINER S19 Pro and is the answer not in the manual?

BITMAIN ANTMINER S19 Pro Specifications

General IconGeneral
Hash Rate110 TH/s
Power Consumption3250W
Power Efficiency29.5 J/TH
Noise Level75 dB
Dimensions370 x 195.5 x 290 mm
Weight13.2 kg
Operating Temperature0 - 40 °C
Network ConnectionEthernet
Chip TypeBM1397
AlgorithmSHA-256
ManufacturerBitmain
ModelAntminer S19 Pro
CategoryServer
Release Year2020
Supported CoinsBitcoin, Bitcoin Cash
Voltage220-240V
CoolingDual Fans

Related product manuals