ML0038 September 27, 2017 - 31 - Copyright 2017 Bitronics, LLC
4.0 OPERATION
4.1 Display
The M350 meters can display several per-phase quantities for the circuit being
monitored. In order to make all quantities available, the display scrolls from quantity to
quantity approximately every 5 seconds. The quantities are refreshed once a second.
The backlit display at the bottom of the instrument indicates to the user what quantity
is being displayed (volts in V3, amps in A3) as well as the primary engineering units
(Kvolts in V3) . Listed on the following pages are standard screens available in the
M350. Configurable screen enable settings are provided through the web server,
allowing the user to enable or disable each of the display screens, in order to view
only a selected subset of all the measurements the meter is capable of displaying.
The following screens are enabled by default:
A3 Ammeter
Amps A,B,C (default home screen)
Demand Amps A,B,C
V3 Voltmeter
Volts AN,BN,CN (default home screen)
Volts AB,BC,CA
To Next Page
Loading...
Need help?
General