Need help?Do you have a question about the Bitronics M350 and is the answer not in the manual?
General| Communication | RS-485 |
|---|---|
| Display | LCD |
| Measurement Range | 0-300V, 0-5A |
| Storage Temperature | -20°C to +70°C |
| Weight | 0.5kg |
Information intended to ensure safe installation and handling of products.
Meaning of symbols and labels used on equipment and documentation.
Covers emissions warnings and decommissioning/disposal guidelines.
Overview of M350 3-phase ammeters and voltmeters capabilities.
Lists the primary features of the M350 family.
Detailed electrical and physical specifications for the M350.
Specifies operating temperature, humidity, altitude, and enclosure ratings.
Procedures for initial inspection and safe installation of the meter.
Requirements for protective earth connections and instrument mounting.
Guidelines for cleaning the exterior of the instrument.
Details on connecting auxiliary power and VT/CT measurement signals.
Configuration and wiring for serial and Ethernet communication interfaces.
How to navigate and interact with the M350 display and buttons.
Detailed functions of keypad buttons in display mode.
Summary of self-test errors and corrective actions.
Methods for configuring the M350 via web or front panel.
Managing passwords and front panel configuration lock.
Step-by-step guide to using the front panel setup menu.
Guide to configuring the M350 using its web page interface.
How to enter and store CT and VT transformer ratios.
Specifics on measuring current and voltage signals.
Explanation of how demand values are calculated and stored.
Monitoring device status via heartbeat and health check registers.
Details on 0-1mA and 4-20mA analog output options and wiring.
Visual diagrams for connecting CT and VT inputs.
Steps to diagnose and resolve Ethernet connection issues.
Visual examples of various M350 display screens.
Identifies the M350 models and their configurations covered by the declaration.
Lists relevant EU directives (EMC, LVD) and compliance status.
Lists standards used for conformity assessment and test report details.
To Next Page