BIXOLON SPP-R300 Connection Manual

Rev. 1.00
- 32 -
Mobile Printer
The contents of the config file are as follows.
** Caution!!!
** Do not change the order or contents of the menu.
** Only need to change the settings, please.
** Do not input port 21, 23, 80, 161, 162, 3318 3319, 3337 and 9000 to Printer Port.
** This number is ignored.
[1] System
1. Printer Name:[SPP-R300]
2. Printer Port Num:[9100]
3. User ID:[admin]
4. User Password:[password]
[2] Protocol
1. Task State
1) HTTPS:[0]
2) TELNET:[1]
3) FTP:[1]
4) SNMP:[0]
2. SNMP
1) Community Name (Read):[public]
2) Community Name (Write):[private]
3) Trap IP Address:[0.0.0.0]
4) Trap Community:[public]
[3] Network
1. Network Mode
1) Infra Network(0) / Adhoc(1):[1]
2) Adhoc Channel:[1]
2. SSID:[BIXOLON_adhoc]
3. Inactivity Time:[10]
4. IP Assignment Method:[0]
5. IP Address:[192.168.1.1]
6. SubnetMask:[255.255.255.0]
7. Gateway:[192.168.1.2]
[4] Authentication
1. Authentication:[0]
2. Cryptograph:[0]
3. EAP Mode:[0]
4. WEP Key:[]
5. PSK Key:[]
6. Authentification ID:[]
7. Authentification Password:[]
* The format of the configuration file is “Configuration item: [Setting value]”.
Uploading a file that doesn‟t have the format shown above will not change the setting
values.

BIXOLON SPP-R300 Specifications

General

Brand	BIXOLON
Model	SPP-R300
Category	Printer
Language	English