SRP-330II/332II
Ver. 2.00
3-3 Inserting and changing the paper roll
Use paper roll that complies with the specifications.
If you use a paper roll including paper core attached to paper, the paper
may not be properly recognized as paper Empty due to not proper
- When opening or closing the cover, be careful not to pinch your
fingers.
- Do not open the print head levers while the printer is printing.
The printer may be damaged.
- Change the paper when the printer is not receiving data, or data
may be lost.
- While the printer is operating, the printer head gets very hot,
so turn off the power and let it cool down completely.
The hot printer head can cause serious burns.
1) Open the Printer Cover by pushing the Cover-Open Button.
When you change the paper, remove the used paper roll.
To Next Page
Loading...
Need help?
General